Table of Contents
Advertisement
3.
Disconnect the three harnesses from the three connectors (CN101, CN301, and CN5005) on the PS-836 board.
RE-291 board
CN6002
Harness
4.
Remove the three screws, and detach the power block assembly from the connector (CN4) on the MB-1214 board
in the direction of arrow.
CN4
5.
Remove the screw, and detach the pin stopper.
HDC4300
CN301
CN5005
Harnesses
Clamper
MB-1214 board
PS-836 board
CN101
Power block assembly
PSW3 x 6
4-28
Advertisement
Table of Contents
