Table of Contents
Advertisement
Procedure
1.
Disconnect the coaxial cable from the connector (CN801) on the DPR-370 board.
2.
Disconnect the two harnesses from the two connectors (CN106, CN107) on the DPR-370 board.
3.
Remove the five screws, and detach the DPR-370 board from the connector (CN102) on the MB-1214 board.
PSW3 x 6
Coaxial cable
CN801
CN106
CN107
Harnesses
PSW3 x 6
Note
When installing the DPR-370 board, match the two bosses with the two holes.
4.
Remove the DPR thermal sheet.
HDC4300
Boss
Holes
PSW3 x 6
CN102
Boss
(MB-1214 board)
DPR-370 board
4-31
Advertisement
Table of Contents
