Table of Contents
Advertisement
How to Change the Setting Values
There are menu items that can be changed setup value by turning the rotary encoder.
The setup value is changed, confirmed or cancelled by following method.
Change: Turn the rotary encoder.
Confirm: Press the rotary encoder.
Cancel: Switch the STATUS/CANCEL to "CANCEL". Before confirming, value can be returned to previous.
5-1-5.
Connection of Equipment
Viewfinder
HDVF-20A/200/C30WR/C35W
HDC4300
Lens
(For ENG/EFP)
Master setup unit
MSU-1000/1500
5-1-6.
Initial Settings
There are following Initial Settings.
• Set using the MSU.
• Set using setup menu and switches of the camera.
Before starting
"5-2. Automatic Adjustment"
When Adjusting Using the MSU
Set each button as follows.
• Power supply and signal switching block
- ALL button → OFF (dark)
- CAM PW button → ON (lit)
- VF PW button → ON (lit)
- TEST 1 button → OFF (dark)
- TEST 2 button → OFF (dark)
- BARS button → OFF (dark)
- CLOSE button → ON (lit)
HDC4300
A-ch
SDI MONI
CCA-5 cable
(max. 200 m)
or later, perform the initial setting.
Waveform monitor
Y, Pb, Pr
R, G, B
Color monitor
75 Ω
5-5
Advertisement
Table of Contents
