Table of Contents
Advertisement
12. Remove the three screws, and detach the CN-3427 board, two cushion drop protection toggles, two SW sliding
sheets, two slide SW water resist sheets, and two slide switch covers.
Flexible flat cable (36 core)
UL tape
CN-3427 board
Slide switch covers
13. Install the removed parts by reversing the steps of removal.
4-11-2.
AUDIO IN Connector (CN-3425 Board)
Preparation
1.
Remove the MIC panel assembly. (Refer
Procedure
1.
Remove the four screws, and detach the CN-3425 board.
HDC4300
Harnesses
CN3
CN1
Slide SW water resist sheets
SW sliding sheets
to"4-11-1. CN-3429 Board/CN-3427 Board" on page 4-47
CN6
CN2
Cushion drop protection toggles
Harness
B2.6 x 5
)
4-49
Advertisement
Table of Contents
