Fluke Calibration 8588A Remote Programmer's Manual page 55

Keyword
SYSTem
:DATe <year>,<Month>,<date>
DATe?
:ERRor[:NEXT]?
:LFRequency <nrf>
:LFRequency:AUTO 0|1|ONCE
:LFRequency?
:MLEVel?
:PRESet [NORMal|FAST]
:TIME <hour>,<minute>,<second>
:TIME?
:TIME:TIMer[:STATe] <boolean>
:TIME:TIMer[:STATe]?
:VERSion?
:LOCal
See note (1)
:REMote
See note (1)
:RWLock
See note (1)
Table 11. SYSTem Subsystem
<year>: rounded to 4 digit integer number
<month>: rounded to Integer in range 1 to 12
<day>: rounded to Integer in range 1 to max days in month
for <year> & <day>
Retrieves the date in same format as set above
Returns the meter's error queue. In the form:
<Error number>,"<Error/Event description>[;<Device
dependent description>]". See Error Codes list below.
Sets line frequency to the nearest of 50 Hz or 60 Hz to <nrf>
Auto detect ON or OFF. ONCE measures and sets line
frequency then turns AUTO off. Default AUTO.
Return the line frequency setting
Returns the hardware Modification level
FAST sets all conditions for special high-speed mode.
NORMal or no parameter sets the normal operating
conditions (as after *RST). Default NORM.
Set <hour>: rounded to Integer from 0 to 23
Set <minute>: rounded to Integer from 0 to 59
Set <second>: rounded to number with resolution of the RTC
from 0 to <60
Returns the current RTC time
Turn reading time stamps ON or OFF
Return the state of reading time stamps
Returns the SCPI version in the form YYY.V where YYY
represents the year and V the version
Put system into local
Put system into remote
Put system into lock out mode TBD
Reference Multimeter and 8 ½ Digit Multimeter
Description
SCPI Commands Reference
51