Fluke Calibration 8588A Remote Programmer's Manual page 31

Keyword
[:SENSe]:Frequency
:COUPling AC|DC
:COUPling?
:BWLimit[:STATe] <boolean>
:BWLimit[:STATe]?
:GATE <nrf>|MIN|MAX|DEF
:GATE? [MIN|MAX|DEF]
:ROUTe:BNC:IMPedance 50R|HIGH
:ROUTe: BNC:IMPedance?
:ROUTe: BNC:THReshold
<nrf>|MIN|MAX|DEF
:ROUTe: BNC:THReshold?
[MIN|MAX|DEF]
:ROUTe:CURRent:RANGe
<nrf>|MIN|MAX|DEF
:ROUTe:CURRent:RANGe?
[MIN|MAX|DEF]
:ROUTe:CURRent:THReshold
<numeric>|MIN|MAX|DEF
:ROUTe:CURRent:THReshold?
[MIN|MAX|DEF]
:ROUTe:SIGNal BNC|ACI|ACV
:ROUTe:SIGNal?
:ROUTe:VOLTage:RANGe
<range>|MIN|MAX|DEF
:ROUTe:VOLTage:RANGe?
[MIN|MAX|DEF]
:ROUTe:VOLTage:THReshold
<numeric>|MIN|MAX|DEF
:ROUTe:VOLTage:THReshold?
[MIN|MAX|DEF]
Table 6. Command Summary (cont.)
Sets the frequency path to ac or dc coupled
Returns the coupling setting
Sets the bandwidth limit ON or OFF
Returns the Bandwidth limit setting
Set gate time to the numeric value in seconds, or to the min,
max or default setting
Returns the selected gate setting, or if specified, the minimum,
maximum or default gate setting in seconds
Sets the impedance for the rear panel BNC input
Returns the impedance set for the rear panel BNC input
Set Threshold to the numeric value or to the min, max or default
threshold setting (-5.0 V to 5.0 V)
Return the Threshold numeric value or if specified, the min, max
or default threshold setting
Sets the current range to be used if the input path is set to ACI
signal
Returns the current range setting
Set Threshold to the numeric value or to the min, max or default
threshold setting (-200 % to 200 % of Range)
Return the threshold setting
Sets the Frequency|Period input path
Returns the Frequency|Period input path setting
Sets the voltage range to be used if the input path is set to ACV
signal or to the MIN, MAX, or Default setting
Returns the voltage range setting or the MIN, MAX, or Default
value
Set Threshold to the numeric value or to the min, max or default
threshold setting (-200 % to 200 % of Range)
Return the threshold setting
Reference Multimeter and 8 ½ Digit Multimeter
Description
SCPI Commands Reference
27