Fluke Calibration 8588A Remote Programmer's Manual page 28

8588A/8558A
Remote Programmer's Manual
[:SENSe]:CURRent:AC
COUNTer:BLIMit[:STATe] <boolean>
COUNTer:BLIMit[:STATe]?
:COUNter:COUPling AC|DC
:COUNter:COUPling?
:COUNter:GATE:AUTO[:STATe]
<boolean>
:COUNter:GATE:AUTO[:STATe]?
:COUPling:AC|DC
:COUPling?
:FILTer <nrf>|MIN|MAX|DEF
:FILTer? [MIN|MAX|DEF]
:RANGe:AUTO[:STATe] <boolean>
:RANGe:AUTO[:STATe]?
:RANGe <nrf>|MIN|MAX|DEF
:RANGe? [MIN|MAX|DEF]
:RESolution <nrf>|MIN|MAX|DEF
:RESolution? [MIN|MAX|DEF]
:SECondary OFF|FREQuency|
PERiod|PTP|PPEak|NPEak|CFACtor
24
Table 6. Command Summary (cont.)
Keyword Description
Turn the frequency path bandwidth limit ON or OFF
Return the state of the frequency path bandwidth limit setting.
Returns 1 for Auto range ON, 0 for auto range OFF
Set the frequency path coupling to ac or dc. Note: if signal path
coupling is ac, frequency path coupling is forced to ac
Return the frequency path coupling setting
Turn Auto selection of counter gate ON or OFF
Return the state of the counter gate auto setting, 1 for Auto gate
ON, 0 for auto gate OFF
Set the ac current signal path coupling to ac or dc. Note: if
signal path coupling is ac, frequency path coupling is forced to
ac
Return the frequency path coupling setting
Set filter value or min, max or default filter
Return the filter setting
Turns Auto range ON or OFF
Returns 1 for Auto range ON, 0 for auto range OFF
Set maximum expected value or min, max or default range
Returns the selected range or, or if specified, the minimum,
maximum or default range
Set maximum expected value or min, max or default resolution;
for example, range is 1 A, Resolution <nrf>. = 0.0001 (100 µA),
the measurement is returned with a resolution of +1.000E-4
Returns the selected resolution, or if specified, the minimum,
maximum or default range
Sets the secondary reading type