Fluke Calibration 8588A Remote Programmer's Manual page 41

Keyword
:RANGe:AUTO[:STATe]<boolean>
:RANGe:AUTO[:STATe]?
:RANGe < nrf >|MIN|MAX|DEF
:RANGe? [MIN|MAX|DEF]
:RESolution < nrf >|MIN|MAX|DEF
:RESolution? [MIN|MAX|DEF]
:SECondary
OFF|CFACtor|FREQuency|NPEak|PERiod
|PTP|PPEak|PUNCertainty|VOLTage
:SECondary?
Table 6. Command Summary (cont.)
Turns Auto range ON or OFF
Returns 1 for Auto range ON, 0 for auto range OFF
Set maximum expected value or MIN, MAX, or
Default range
Returns the selected range or, or if specified, the
MIN, MAX, or Default range
Set maximum expected value or MIN, MAX, or
Default resolution; for example, range is 1 A,
Resolution <nrf>. = 0.0001 (100 µA), the
measurement is returned with a resolution of
+1.000E-4
Returns the selected resolution, or if specified, the
MIN, MAX, or Default range
Sets the secondary reading type
OFF = Secondary reading is not shown
CFACtor = Secondary reading is the crest factor
FREQuency = Secondary reading is frequency
NPEak = Secondary reading is negative peak
PERiod = Secondary reading is period
PTP = Secondary reading is peak-to-peak
PPEak = Secondary reading is positive peak
PUNCertainty = additional Power Uncertainty
VOLTage = the shunt output voltage
Returns the selected secondary reading setting
Reference Multimeter and 8 ½ Digit Multimeter
Description
SCPI Commands Reference
37