Table of Contents
Advertisement
Chapter 41 ISP Accounts
Table 191 Object > ISP Account (continued)
LABEL
User Name
Add icon
41.3 ISP Account Edit
The ISP Account Edit screen lets you add information about new accounts and edit
information about existing accounts. To open this window, open the ISP Account screen. (See
Section 41.2 on page
Edit screen below.
Figure 411 Object > ISP Account > Edit
The following table describes the labels in this screen.
Table 192 Object > ISP Account > Edit
LABEL
Profile Name
Protocol
564
DESCRIPTION
This field displays the user name of the ISP account.
This column provides icons to add, edit, and remove ISP accounts.
To add information about a new ISP account, click the Add icon at the top of the
column. The ISP Account Edit screen appears.
To edit information about an existing account, click the Edit icon next to the ISP
account. The ISP Account Edit screen appears.
To remove information about an existing account, click the Remove icon next to
the ISP account. The web configurator confirms that you want to delete the account
before doing so.
563.) Then, click on an Add icon or Edit icon to open the ISP Account
DESCRIPTION
This field is read-only if you are editing an existing account. Type in the profile
name of the ISP account. The profile name is used to refer to the ISP account. You
may use 1-31 alphanumeric characters, underscores(
character cannot be a number. This value is case-sensitive.
This field is read-only if you are editing an existing account. Select the protocol
used by the ISP account. Options are:
pppoe - This ISP account uses the PPPoE protocol.
pptp - This ISP account uses the PPTP protocol.
_
), or dashes (-), but the first
ZyWALL USG 1000 User's Guide
Advertisement
Table of Contents
Troubleshooting
