Other Applications; Application Patrol Screens; Application Patrol General - ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual

Chapter 27 Application Patrol

27.6 Other Applications

Sometimes, the ZyWALL cannot identify the application. For example, the application might
be a new application, or the packets might arrive out of sequence. (The ZyWALL does not
reorder packets when identifying the application.) In these cases, you can still provide a
default rule for the ZyWALL to follow. You can use source zone, destination zone, destination
port, schedule, user, source, and destination information as criteria to create a sequence of
specific conditions, similar to the sequence of rules used by firewalls, to specify what the
ZyWALL should do more precisely. You can also control the bandwidth used by these other
applications.

27.7 Application Patrol Screens

Use the General summary screen to enable and disable application patrol.
Use the Common, Instant Messenger, Peer to Peer, VoIP, and Streaming screens to look at
the applications the ZyWALL can recognize, and review the settings for each one. You can
also enable and disable the rules for each application and specify the default and custom
policies for each application.
The Other screen controls what the ZyWALL does when it does not recognize the application,
and it identifies the conditions that refine this. It also lets you open the Other Configuration
Add/Edit screen to create new conditions or edit existing ones.
Use the Statistics screen to see a bandwidth usage graph and statistics for each protocol.

27.8 Application Patrol General

Use this screen to enable and disable application patrol. It also lists the registration status and
details about the signature set the ZyWALL is using.
You must register for the IDP/AppPatrol signature service (at least the trial)
before you can use it.
See Chapter 8 on page 165
Click AppPatrol to open the following screen.
388
for how to register.
ZyWALL USG 1000 User's Guide