Table 248 System Logs - ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual

Table 247 Built-in Services Logs (continued)
LOG MESSAGE
Access control rule %d
of %s was moved to %d.
SNMP trap can not be
sent successfully

Table 248 System Logs

LOG MESSAGE
Port %d is up!!
Port %d is down!!
%s is dead at %s
%s process count is
incorrect at %s
%s becomes Zombie at
%s
DHCP Server executed
with cautious mode
enabled
DHCP Server executed
with cautious mode
disabled
Received packet is not
an ARP response packet
Receive an ARP
response
Receive ARP response
from %s (%s)
The request IP is: %s,
sent from %s
Received ARP response
NOT for the request IP
address
Receive an ARP
response from the
client issuing the
DHCP request
ZyWALL USG 1000 User's Guide
DESCRIPTION
An access control rule was moved successfully.
1st %d is the previous index .
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
2nd %d is current previous index.
Cannot send a SNMP trap to a remote host due to network error
DESCRIPTION
When LINK is up, %d is the port number.
When LINK is down, %d is the port number.
A daemon (process) is gone (was killed by the operating system).
1st %s: Daemon Name, 2nd %s: date+time
The count of the listed process is incorrect.
1st %s: Daemon Name, 2nd %s: date+time
A process is present but not functioning.
1st %s: Daemon Name, 2nd %s: date+time
When memory usage exceed threshold-max, memory usage reaches
%d%% :mem-threshold-max.
When disk usage exceeds threshold-max, %s: Partition name file
system usage reaches %d%%: disk-threshold-max.
When memory usage drops below threshold-min, System Memory
usage drops below the threshold of %d%%: mem-threshold-min.
When disk usage drops below threshold-min, %s: partition_name file
system drops below the threshold of %d%%: disk-threshold-min.
DHCP Server executed with cautious mode enabled.
DHCP Server executed with cautious mode disabled.
A packet was received but it is not an ARP response packet.
The device received an ARP response.
The device received an ARP response from the listed source.
The device accepted a request.
The device received an ARP response that is NOT for the requested IP
address.
The device received an ARP response from the client issuing the
DHCP request.
Appendix B Log Descriptions
685