ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual page 224

Chapter 11 Trunks
Table 65 Network > Interface > Trunk > Edit (continued)
LABEL
Spillover
Add icon
224
DESCRIPTION
This field displays with the spillover load balancing algorithm. Specify the maximum
bandwidth of traffic in kilobits per second (1~1048576) to send out through the
interface before using another interface. When this spillover bandwidth limit is
exceeded, the ZyWALL sends new session traffic through the next interface. The
traffic of existing sessions still goes through the interface on which they started.
The ZyWALL uses the group member interfaces in the order that they are listed.
This column lets you add, remove and move trunk members.
To add an interface to the trunk, click an Add icon. The Trunk Member Select
screen appears.
To remove an interface from a trunk, click the Remove icon next to it. The ZyWALL
confirms you want to remove it before doing so.
To move an interface to a different number in the list, click the Move icon next to it.
In the field that appears, specify the number to which you want to move the
interface.
ZyWALL USG 1000 User's Guide