Uploading A Custom Logo; Establishing An Ssl Vpn Connection; Figure 216 Example Logo Graphic Display - ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual

21.5.1 Uploading a Custom Logo

Follow the steps below to upload a custom logo on the ZyWALL.
1 Click VPN > SSL VPN and click the Global Setting tab to display the configuration
screen.
2 Click Browse to locate the logo graphic. Make sure the file is in GIF format.
3 Click Apply to start the file transfer process.
4 Log in as a user to verify that the new logo displays properly.
The following shows an example logo on the remote user screen.

Figure 216 Example Logo Graphic Display

21.6 Establishing an SSL VPN Connection

Follow the steps below to establish an SSL VPN connection.
1 Display the login screen and enter your user account information (the user name and
password).
2 Select Login to SSL VPN.
3 Click Login.
4 SSL VPN connection starts. This may take several minutes depending on your network
connection. Once the connection is up, you should see the client portal screen. The
following shows an example.
ZyWALL USG 1000 User's Guide
Chapter 21 SSL VPN
329