ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual page 502

Chapter 33 Device HA
Table 154 Network > Device HA > Synchronize (continued)
LABEL
Sync. Now
Auto
Synchronize
Interval
Apply
Reset
502
DESCRIPTION
Click this button to get updated certificates, AV signatures, IDP and application
patrol signatures, system protect signatures, and configuration information from the
specified ZyWALL router.
Note: If the new configuration is different from the existing one on
this backup ZyWALL, this backup ZyWALL applies the entire
configuration.
Select this to get updated configuration and IDP signatures automatically from the
specified ZyWALL according to the specified Interval. The first synchronization
begins after the specified Interval; the ZyWALL does not synchronize immediately.
This field is only available if Auto Synchronize is checked. Type the number of
minutes to wait between synchronizations. This value must be a number between 1
and 1440 (one day).
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL USG 1000 User's Guide