Alg Screen; Figure 174 Voip With Multiple Wan Ip Addresses; Figure 175 Network > Alg - ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual

For example, you configure firewall and virtual server rules to allow LAN IP address A to
receive calls through public WAN IP address 1. You configure different firewall and port
forwarding rules to allow LAN IP address B to receive calls through public WAN IP address
2. You configure corresponding policy routes to have calls from LAN IP address A go out
through WAN IP address 1 and calls from LAN IP address B go out through WAN IP address
2.

Figure 174 VoIP with Multiple WAN IP Addresses

18.3 ALG Screen

Click Network > ALG to open the ALG screen. Use this screen to turn ALGs off or on,
configure the port numbers to which they apply, and configure SIP ALG time outs.
If the ZyWALL provides an ALG for a service, you must enable the ALG in
order to perform bandwidth management on that service's traffic.
Figure 175 Network > ALG
ZyWALL USG 1000 User's Guide
Chapter 18 ALG
269