ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual page 688

Appendix B Log Descriptions
Table 248 System Logs (continued)
LOG MESSAGE
Update the profile %s
has failed because
Custom IP was empty.
Update the profile %s
has failed because WAN
interface was empty.
The profile %s has
been paused because
the VRRP status of WAN
interface was standby.
Update the profile %s
has failed because WAN
interface was link-
down.
Update the profile %s
has failed because WAN
interface was not
connected.
Update the profile %s
has failed because IP
address of WAN
interface was empty.
Update the profile %s
has failed because
ping-check of WAN
interface has failed.
The profile %s has
been paused because
the HA interface of
VRRP status was
standby.
Update the profile %s
has failed because HA
interface was link-
down.
Update the profile %s
has failed because the
HA interface was not
connected.
Update the profile %s
has failed because IP
address of HA
interface was empty.
Update the profile %s
has failed because
ping-check of HA
interface has failed.
DDNS has been disabled
by Device-HA.
688
DESCRIPTION
The DDNS profile's IP select type is custom, and a custom IP was not
defined, %s is the profile name.
If the DDNS profile's IP select type is iface, it needs a WAN iface, %s is
the profile name.
The profile is paused by device-HA, because the VRRP status of that
iface is standby, %s is the profile name.
DDNS profile cannot be updated for WAN IP because WAN iface is
link-down, %s is the profile name.
DDNS profile cannot be updated for WAN IP because WAN iface is
PPP and not connected, %s is the profile name.
DDNS profile cannot be updated because the IP of WAN iface is
0.0.0.0, 1st %s is the profile name.
DDNS profile cannot be updated because the ping-check for WAN
iface failed , %s is the profile name.
The profile is paused by Device-HA, because the VRRP status of that
HA iface is standby, %s is the profile name.
DDNS profile cannot be updated for HA IP address because HA iface
is link-down, %s is the profile name.
DDNS profile cannot be updated for HA IP address because HA iface
is PPP and not connected, %s is the profile name.
DDNS profile cannot be updated because the IP address of HA iface is
0.0.0.0, %s is the profile name.
DDNS profile cannot be updated because the fail of ping-check for HA
iface, %s is the profile name
DDNS is disabled by Device-HA, because all VRRP groups are
standby.
ZyWALL USG 1000 User's Guide