Session Screen; Table 226 Maximum Values For Reports - ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual

Chapter 47 Reports
Table 225 Maintenance > Report > Traffic (continued)
LABEL
Web Site
Hits
The following table displays the maximum number of records shown in the report, the byte
count limit, and the hit count limit.

Table 226 Maximum Values for Reports

LABEL
Maximum
Number of
Records
Byte Count Limit
Hit Count Limit

47.2 Session Screen

The Session screen displays information about active sessions for debugging or statistical
analysis. It is not possible to manage sessions in this screen. The following information is
displayed.
• User who started the session
• Protocol or service port used
• Source address
• Destination address
• Number of bytes received (so far)
• Number of bytes transmitted (so far)
• Duration (so far)
You can look at all the active sessions by user or by service, or you can filter the information
by user, protocol / service or service group, source address, and/or destination address and
view it by user.
To access this screen, login to the web configurator. When the main screen appears, click
Maintenance > Report > Session. The following screen appears.
640
DESCRIPTION
This field displays the domain names most often visited. The ZyWALL counts each
page viewed on a Web site as another hit. The maximum number of domain names
in this report is indicated in
This field displays how many hits the Web site received. The ZyWALL counts hits
by counting HTTP GET packets. Many Web sites have HTTP GET references to
other Web sites, and the ZyWALL counts these as hits too. The count starts over at
zero if the number of hits passes the hit count limit. See
DESCRIPTION
20
64
2 bytes; this is just less than 17 million terabytes.
64
2 hits; this is over 1.8 x 10
Table 226 on page 640.
19
hits.
ZyWALL USG 1000 User's Guide
Table 226 on page 640.