Configuring Vantage Cnm; Figure 456 System > Vantage Cnm; Table 214 System > Vantage Cnm - ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual

44.14 Configuring Vantage CNM

Vantage CNM is disabled on the device by default. Click System > Vantage CNM to
configure your device's Vantage CNM settings.
Figure 456 System > Vantage CNM
The following table describes the labels in this screen.
Table 214 System > Vantage CNM
LABEL
Enable
Server IP Address/
FQDN
Transfer Protocol
Device Management
IP
Custom IP
Keepalive Interval
Periodic Inform
Interval
ZyWALL USG 1000 User's Guide
DESCRIPTION
Select this check box to allow Vantage CNM to manage your ZyWALL.
Enter the IP address or fully qualified domain name of the Vantage server.
If the Vantage CNM server is on a different subnet to the ZyWALL and is
behind a NAT router, enter the WAN IP address of the NAT router here and
configure the NAT router to forward UDP port 11864 traffic to the Vantage
CNM server.
If the Vantage CNM server is behind a firewall, you may have to create a rule
on the firewall to allow UDP port 11864 traffic through to the Vantage CNM
server (most (new) ZyXEL firewalls automatically allow this).
Select whether the Vantage CNM sessions should use regular HTTP
connections or secure HTTPS connections.
Note: HTTPS is recommended.
The Vantage CNM server must use the same setting.
Select Auto to have the ZyWALL allow Vantage CNM sessions to connect to
any of the ZyWALL's IP addresses.
Select Custom to specify the ZyWALL's IP address that allows Vantage CNM
sessions. Configure the Custom IP field if you select this. You might for
example need to specify the IP address when using a WAN trunk that uses
multiple WAN IP addresses.
Specify the ZyWALL's IP address that allows Vantage CNM sessions. This
field applies when you select Custom in the Device Management IP field.
Set how often the ZyWALL sends a keep alive packet to the Vantage CNM
server if there is no other traffic. The keep alive packets maintain the Vantage
CNM server's control session.
Select this option to have the ZyWALL periodically send "Inform" messages to
the Vantage CNM server.
Chapter 44 Service Control
611