Table of Contents
Advertisement
Chapter 20 IPSec VPN
• Instead of using the pre-shared key, the ZyWALL and remote IPSec router check the
signatures on each other's certificates. Unlike pre-shared keys, the signatures do not have
to match.
• The local and peer ID type and content come from the certificates.
You must set up the certificates for the ZyWALL and remote IPSec router first.
20.4.3 VPN Gateway Summary
The VPN Gateway summary screen displays the VPN gateways in the ZyWALL, as well as
the ZyWALL's address, remote IPSec router's address, and associated VPN connections for
each one. In addition, it also lets you activate and deactivate each VPN gateway.
To access this screen, click VPN > Network > IPSec VPN > VPN Gateway. The following
screen appears.
Figure 205 VPN > IPSec VPN > VPN Gateway
Each field is discussed in the following table. See
information.
Table 95 VPN > IPSec VPN > VPN Gateway
LABEL
#
Name
My address
Secure Gateway
VPN Connection
312
DESCRIPTION
This field is a sequential value, and it is not associated with a specific gateway.
This field displays the name of the VPN gateway.
This field displays the address of the VPN gateway. The address can be an
interface or a domain name.
This field displays the IP address(es) of the remote IPSec routers.
This field displays VPN connections that use this VPN gateway.
Section 20.4.4 on page 313
ZyWALL USG 1000 User's Guide
for more
Advertisement
Table of Contents
Troubleshooting
