Figure 265 ProhibitIpSec DWORD Value
6 Restart the computer and continue with the next section.
26.6.2.2 Configure the Windows 2000 IPSec Policy
After you have created the registry entry and restarted the computer, use these directions to
configure an IPSec policy for the computer to use.
1 Click Start > Run. Type mmc and click OK.
Figure 266 Run mmc
2 Click Console > Add/Remove Snap-in.
Figure 267 Console > Add/Remove Snap-in
3 Click Add > IP Security Policy Management >Add > Finish. Click Close > OK.
ZyWALL USG 1000 User's Guide
Chapter 26 L2TP VPN Example
363