Table 250 Device Ha Logs - ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual

Appendix B Log Descriptions
Table 249 Connectivity Check Logs (continued)
LOG MESSAGE
Can't get remote
address of %s
interface
Can't get NETMASK
address of %s
interface
Can't get BROADCAST
address of %s
interface
Can't use MULTICAST IP
for destination
The destination is
invalid, because
destination IP is
broadcast IP
Can't get MAC address
of %s interface!
To send ARP REQUEST
error!
The %s routing status
seted to DEAD by
connectivity-check
The %s routing status
seted ACTIVATE by
connectivity-check

Table 250 Device HA Logs

LOG MESSAGE
Device HA VRRP Group
%s has been added.
Device HA VRRP group
%s has been modified.
Device HA VRRP group
%s has been deleted.
Device HA VRRP
interface %s for VRRP
Group %s has changed.
Device HA syncing from
%s starts.
%s has no file to
sync, Skip syncing it
for %s.
690
DESCRIPTION
The connectivity check process can't get remote address of PPP
interface
%s: interface name
The connectivity check process can't get netmask address of interface.
%s: interface name
The connectivity check process can't get broadcast address of
interface
%s: interface name
The connectivity check process can't use multicast address to check
link-status.
The connectivity check process can't use broadcast address to check
link-status.
The connectivity check process can't get MAC address of interface.
%s: interface name
The connectivity check process can't send ARP request packet.
The interface routing can't forward packet.
%s: interface name
The interface routing can forward packet.
%s: interface name
DESCRIPTION
An VRRP group has been created, %s: the name of VRRP group.
An VRRP group has been modified, %s: the name of VRRP group.
An VRRP group has been deleted, %s: the name of VRRP group.
Configuration of an interface that belonged to a VRRP group has been
changed, 1st %s: VRRP interface name, 2ed %s: %s: the name of
VRRP group.
Device HA Syncing from Master starts when user click "Sync Now"
using Auto Sync, %s: The IP of FQDN of Master.
There is no file to be synchronized from the Master when syncing a
object (AV/AS/IDP/Certificate/System Configuration), But in fact, there
should be something in the Master for the device to synchronize with,
1st %s: The syncing object, 2ed %s: The feature name for the syncing
object.
ZyWALL USG 1000 User's Guide