Appendix B Log Descriptions
Table 257 Force Authentication Logs
LOG MESSAGE
Force User
Authentication will be
enabled due to http
server is enabled.
Force User
Authentication will be
disabled due to http
server is disabled.
Force User
Authentication may not
work properly!
Table 258 File Manager Logs
LOG MESSAGE
ERROR:#%s, %s
WARNING:#%s, %s
ERROR:#%s, %s
WARNING:#%s, %s
Resetting system...
System resetted. Now
apply %s..
Running %s...
702
DESCRIPTION
Force user authentication will be turned on because HTTP server was
turned on.
Force user authentication will be turned off because HTTP server was
turned off.
DESCRIPTION
Apply configuration failed, this log will be what CLI command is and
what error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
Apply configuration failed, this log will be what CLI command is and
what warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Run script failed, this log will be what wrong CLI command is and what
error message is.
1st %s is CLI command.
2nd %s is error message when apply CLI command.
Run script failed, this log will be what wrong CLI command is and what
warning message is.
1st %s is CLI command.
2nd %s is warning message when apply CLI command.
Before apply configuration file.
After the system reset, it started to apply the configuration file.
%s is configuration file name.
An administrator ran the listed shell script.
%s is script file name.
ZyWALL USG 1000 User's Guide