Table 228 Configuration > Object > ISP Account (continued)
LABEL
#
Profile Name
Protocol
Authentication
Type
User Name
45.2.1 ISP Account Edit
The ISP Account Edit screen lets you add information about new accounts and edit information
about existing accounts. To open this window, open the ISP Account screen. (See
page
483.) Then, click on an Add icon or Edit icon to open the ISP Account Edit screen below.
Figure 326 Configuration > Object > ISP Account > Edit
The following table describes the labels in this screen.
Table 229 Configuration > Object > ISP Account > Edit
LABEL
Profile Name
Protocol
Chapter 45 ISP Accounts
DESCRIPTION
This field is a sequential value, and it is not associated with a specific entry.
This field displays the profile name of the ISP account. This name is used to identify the
ISP account.
This field displays the protocol used by the ISP account.
This field displays the authentication type used by the ISP account.
This field displays the user name of the ISP account.
DESCRIPTION
This field is read-only if you are editing an existing account. Type in the profile name of the
ISP account. The profile name is used to refer to the ISP account. You may use 1-31
alphanumeric characters, underscores(
number. This value is case-sensitive.
This field is read-only if you are editing an existing account. Select the protocol used by the
ISP account. Options are:
pppoe - This ISP account uses the PPPoE protocol.
pptp - This ISP account uses the PPTP protocol.
UAG Series User's Guide
), or dashes (-), but the first character cannot be a
_
484
Section 45.2 on