Figure 360 Configuration > Object > ISP Account
The following table describes the labels in this screen. See
more information as well.
Table 225 Configuration > Object > ISP Account
LABEL
Add
Edit
Remove
Object
References
#
Profile Name
Protocol
Authentication
Type
User Name
29.11.1.1 ISP Account Edit
The ISP Account Edit screen lets you add information about new accounts and edit information
about existing accounts. To open this window, open the ISP Account screen. (See
on page
529.) Then, click on an Add icon or Edit icon to open the ISP Account Edit screen below.
Figure 361 Configuration > Object > ISP Account > Edit
Chapter 29 Object
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to be able to modify the entry's settings.
To remove an entry, select it and click Remove. The USG confirms you want to remove it
before doing so.
Select an entry and click Object References to open a screen that shows which settings
use the entry.
This field is a sequential value, and it is not associated with a specific entry.
This field displays the profile name of the ISP account. This name is used to identify the
ISP account.
This field displays the protocol used by the ISP account.
This field displays the authentication type used by the ISP account.
This field displays the user name of the ISP account.
USG20(W)-VPN Series User's Guide
the ISP Account Edit section
530
below for
Section 29.11.1