Chapter 10 Interface
Figure 129 Network > Interface > Port Grouping
Each section in this screen is described below.
Table 51 Network > Interface > Port Grouping
LABEL
Representative
Interface (ge1, ge2,
ge3, ge4, ge5)
Physical Port (1, 2,
3, 4, 5)
Apply
Reset
10.4 VLAN Interfaces
This section introduces VLAN and VLAN interfaces and then explains the screens for VLAN
interfaces.
10.4.1 VLAN Overview
A Virtual Local Area Network (VLAN) divides a physical network into multiple logical
networks. The standard is defined in IEEE 802.1q.
196
DESCRIPTION
These are Ethernet interfaces. To add a physical port to a representative
interface, drag the physical port onto the corresponding representative
interface.
These are the physical ports as they appear on the front panel of the ZyWALL.
To add a physical port to a representative interface, drag the physical port onto
the corresponding representative interface.
Click this button to save your changes and apply them to the ZyWALL.
Click this button to change the port groups to their current configuration (last-
saved values).
ZyWALL USG 1000 User's Guide