ZyXEL Communications Unified Security Gateway ZyWALL 1000 User Manual page 686

Appendix B Log Descriptions
Table 248 System Logs (continued)
LOG MESSAGE
Receive an ARP
response from an
unknown client
In total, received %d
arp response packets
for the requested IP
address
Clear arp cache
successfully.
Client MAC address is
not an Ehernet address
DHCP request received
via interface
%s (%s:%s), src_mac:
%s with requested IP:
%s
IP confliction is
detected. Send back
DHCP-NAK.
Clear ARP cache done
NTP update successful,
current time is %s
NTP update failed
Device is rebooted by
administrator!
Insufficient memory.
Connect to dyndns
server has failed.
Update the profile %s
has failed because of
strange server
response.
Update the profile %s
has succeeded because
the IP address of FQDN
%s was not changed.
Update the profile %s
has succeeded.
Update the profile %s
has failed because the
FQDN %s is invalid.
Update the profile %s
has failed because the
FQDN %s is malformed.
686
DESCRIPTION
The device received an ARP response from an unknown client.
The device received the specified total number of ARP response
packets for the requested IP address.
The ARP cache was cleared successfully.
A client MAC address is not an Ethernet address.
The device received a DHCP request through the specified interface.
IP conflict was detected. Send back DHCP-NAK.
Clear ARP cache done.
The device successfully synchronized with a NTP time server .
%s is the time format.
The device was not able to synchronize with the NTP time server
successfully.
An administrator restarted the device.
Cannot allocate system memory.
Cannot connect to members.dyndns.org to update DDNS.
Update profile failed because the response was strange, %s is the
profile name.
Update profile succeeded, because the IP address of profile is
unchanged, %s is the profile name.
Update profile succeeded, %s is the profile name.
Update profile failed because FQDN for the profile is invalid for
DynDNS, 1st %s is the profile name, 2nd %s is the FQDN of the
profile.
The FQDN format is malformed for DynDNS server, 1st %s is the
profile name, 2nd %s is the FQDN of the profile.
ZyWALL USG 1000 User's Guide