INSTALLATION AND CONNECTION
4 Installation and Connection
4.1 Construction of the device
Front view
Figure 10:
Front view of the device
DANGER
42
Remove the front cover
• Pull with both hands low in the
cover.
• Tilt cover forward to approx. 45
degrees, until the plates solve
above from the mounting.
• Remove the cover forward.
Remove the cover from the
DC bus
• Compress lug of the cover,
remove forward.
Hazardous voltage under the cover of the DC bus
► Secure isolation from supply of the DC bus at the power supply and
regenerative unit!
Front without cover