KEB 00.F4.010-3009 Instruction Manual
  1. Manuals
  2. Brands
  3. KEB Manuals
  4. Control Unit
  5. 00.F4.010-3009
  6. Instruction manual

KEB 00.F4.010-3009 Instruction Manual

Memory operator
Hide thumbs
Table of Contents

Advertisement

Quick Links

BETRIEBSANLEITUNG
INSTRUCTION MANUAL
KEB Memory Operator
Memory Operator
7/2003

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 00.F4.010-3009 and is the answer not in the manual?

Questions and answers

Related Manuals for KEB 00.F4.010-3009

Summary of Contents for KEB 00.F4.010-3009

  • Page 1 BETRIEBSANLEITUNG INSTRUCTION MANUAL KEB Memory Operator Memory Operator 7/2003...

  • Page 3: Table Of Contents

    Table of Contents General................GB 4 1.1 Product Description ............. GB 4 Memory Operator ............... GB 5 2.1 Operation as Digital Operator ..........GB 5 2.2 Operation as Memory Operator ..........GB 6 2.2.1 Upload ...................... GB 7 2.2.2 Download ....................GB 7 2.2.3 Abort and Fault Acknowledgement ............

  • Page 4: General

    Within the scope of automization, systems are needed which are more powerful and flexible. With this in mind KEB developed a programming unit which makes it possible to program several inverters quickly and without internetworking.

  • Page 5: Memory Operator

    The Digital Operator is the Standard Operator without interface in the Digital Operator KEB COMBIVERT F4/S4. The Memory Operator is downward compatible and can be used for normal operation except for one restriction. During the operation of the Memory Operator the Drive Mode in COMBIVERT F4/S4 may not be activated, because the key assignment overlaps with the memory mode.

  • Page 6: Operation As Memory Operator

    2.2 Operation as In this operating mode the parameter lists can Memory Operator - be read from the inverter (Mode: FU_OP) (Upload) - be written to the inverter (Mode: OP_FU) (Download) Switch off COMBIVERT wait until the display or LED is off Insert Operator and switch on the unit with 9600 Baud with 19200 Baud...

  • Page 7: Upload

    2.2.1 Upload Operating mode: download FUNC. Changes to the operating mode: upload SPEED when Display „no_Lo“ Operating mode: upload see section 3.1 Lock Mode FU_OP Starts the upload process START Upload operating Upload completed ENTER Confirms the upload FUNC. ENTER Hold for approx.

  • Page 8: Special Functions

    3. Special functions 3.1 Lock Mode FU_OP The mode FU_OP (Upload) can be locked, to make sure that the data stored in the operator can not be overwritten.The status is displayed by pressing the POWER-ON button and the „FUNC.-key“ simultaneously. Lock Mode FU_OP: locked the START...

  • Page 9: Drive Mode In The Memory-Operator

    3.3 Drive-Mode in the To switch an inverter/servo with Memory-Operator into the memory mode Memory-Operator do the following: Inverter/Servo in Drive-Mode ENTER FUNC. press SPEED Memory Mode To return to the Drive-Mode, do the following: Inverter/Servo in Drive-Mode ENTER FUNC. press SPEED Inverter/Servo is in the CP-Mode...

  • Page 10: Error Messages

    4. Error Messages Display Description Cause / Remedy Frequency inverter or servo controller Connection pin broken/missing; Baud was not recognized by the operator rate not correct adjusted; Operator or controller defective Upload unpossible - Data of the Mode FU_OP (UPLOAD) is locked. inver ter cannot be load in the (see 3.1) operator...
  • Page 12 Telefon 00 49 / 52 63 / 4 01 - 0 • Fax 00 49 / 52 63 / 4 01 - 1 16 Internet: www.keb.de • E-mail: info@keb.de KEB Antriebstechnik GmbH & Co. KG Wildbacher Str. 5 • D - 08289 Schneeberg Telefon 0049 / 37 72 / 67 - 0 •...

Table of Contents