Backup Configuration; Table 140 Filename Conventions - ZyXEL Communications Prestige 662H Series User Manual

Prestige 662H/HW Series User's Guide
The following table is a summary. Please note that the internal filename refers to the filename
on the Prestige and the external filename refers to the filename not on the Prestige, that is, on
your computer, local network or FTP site and so the name (but not the extension) may vary.
After uploading new firmware, see the ZyNOS F/W Version field in Menu 24.2.1 – System
Maintenance – Information to confirm that you have uploaded the correct firmware version.
The AT command is the command you enter after you press "y" when prompted in the SMT
menu to go into debug mode.

Table 140 Filename Conventions

FILE TYPE
Configuration
File
Firmware

40.2 Backup Configuration

Option 5 from Menu 24 – System Maintenance allows you to backup the current Prestige
configuration to your computer. Backup is highly recommended once your Prestige is
functioning properly. FTP is the preferred methods for backing up your current configuration
to your computer since they are faster. Any serial communications program should work fine;
however, you must use Xmodem protocol to perform the download/upload and you don't have
to rename the files.
Please note that terms "download" and "upload" are relative to the computer. Download
means to transfer from the Prestige to the computer, while upload means from your computer
to the Prestige.
40.2.1 Backup Configuration
Follow the instructions as shown in the next screen.
397
INTERNAL NAME EXTERNAL NAME
Rom-0 This is the configuration filename on the
Prestige. Uploading the rom-0 file replaces the
entire ROM file system, including your Prestige
configurations, system-related data (including
the default password), the error log and the
trace log.
Ras This is the generic name for the ZyNOS
firmware on the Prestige.
Chapter 40 Firmware and Configuration File Maintenance
DESCRIPTION
*.rom
*.bin