Chapter 25 Introducing The Smt; Smt Introduction; Procedure For Smt Configuration Via Telnet; Entering Password - ZyXEL Communications Prestige 662H Series User Manual

This chapter explains how to access and navigate the System Management Terminal and gives

25.1 SMT Introduction

The Prestige's SMT (System Management Terminal) is a menu-driven interface that you can
access from a terminal emulator over a telnet connection. This chapter shows you how to
access the SMT (System Management Terminal) menus via Telnet, how to navigate the SMT
and how to configure SMT menus.

25.1.1 Procedure for SMT Configuration via Telnet

The following procedure details how to telnet into your Prestige.
1 In Windows, click Start (usually in the bottom left corner), Run and then type "
192.168.1.1
2 Enter "
3 After entering the password you will see the main menu.
Please note that if there is no activity for longer than five minutes (default timeout period)
after you log in, your Prestige will automatically log you out. You will then have to telnet into
the Prestige again.

25.1.2 Entering Password

The login screen appears after you press [ENTER], prompting you to enter the password, as
shown next.
For your first login, enter the default password "
displays an asterisk "
Please note that if there is no activity for longer than five minutes after you log in, your
Prestige will automatically log you out.

Chapter 25 Introducing the SMT

Introducing the SMT
" (the default IP address) and click OK.
" in the Password field.
1234
" for each character you type.
*
Prestige 662H/HW Series User's Guide
C
H A P T E R
". As you type the password, the screen
1234
2 5
an overview of its menus.
telnet
296