ZyXEL Communications Prestige 662H Series User Manual page 315

Prestige 662H/HW Series User's Guide
Table 110 TCP/IP Ethernet Setup (continued)
FIELD
IP Subnet Mask
RIP Direction
Version
Multicast
IP Policies
Edit IP Alias
315
DESCRIPTION
Your Prestige will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the Prestige (refer to the
SPACE BAR
Press [ ] to select the RIP direction. Choices are Both, In Only, Out
Only or None.
SPACE BAR]
Press [ to select the RIP version. Choices are RIP-1, RIP-2B or RIP-
2M.
IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
establish membership in a Multicast group. The Prestige supports both IGMP
version 1 (IGMP-v1) and version 2 (IGMP-v2). Press the [
IP Multicasting or select None to disable it.
Create policies using SMT menu 25 (see
them on the Prestige LAN interface here. You can apply up to four IP Policy sets
(from twelve) by entering their numbers separated by commas.
The Prestige supports three logical LAN interfaces via its single physical Ethernet
interface with the Prestige itself as the gateway for each LAN network. Press
SPACE BAR
[ ] to change No to Yes and press [
IP Subnetting appendix for more information).
SPACE BAR]
Chapter 43 IP Policy Routing
ENTER
] to display Menu 3.2.1.
Chapter 28 Menu 3 LAN Setup
to enable
) and apply