Table 99 Navigating The Smt Interface; Table 100 Smt Main Menu - ZyXEL Communications Prestige 662H Series User Manual

Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.

Table 99 Navigating the SMT Interface

OPERATION
Move down to
another menu
Move up to a
previous menu
Move to a hidden
menu
Move the cursor
Entering
information
Required fields
N/A fields
Save your
configuration
Exit the SMT
After you enter the password, the SMT displays the main menu, as shown next.

Table 100 SMT Main Menu

Getting Started
1. General Setup
2. WAN Backup Setup
3. LAN Setup
4. Internet Access Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
14. Dial-in User Setup
15. NAT Setup
Chapter 25 Introducing the SMT
KEY STROKE DESCRIPTION
[ENTER] To move forward to a submenu, type in the number of the
desired submenu and press [ENTER].
[ESC] Press [ESC] to move back to the previous menu.
Press [SPACE Fields beginning with "Edit" lead to hidden menus and have a
BAR] to change default setting of No. Press [SPACE BAR] once to change No
No to Yes then to Yes, then press [ENTER] to go to the "hidden" menu.
press [ENTER].
[ENTER] or [UP]/ Within a menu, press [ENTER] to move to the next field. You
[DOWN] arrow can also use the [UP]/[DOWN] arrow keys to move to the
keys. previous and the next field, respectively.
Type in or press You need to fill in two types of fields. The first requires you to
[SPACE BAR], type in the appropriate information. The second allows you to
then press cycle through the available choices by pressing [SPACE BAR].
[ENTER].
?
< > or All fields with the symbol <?> must be filled in order to be able
ChangeMe to save the new configuration.
All fields with ChangeMe must not be left blank in order to be
able to save the new configuration.
<N/A> Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
[ENTER] Save your configuration by pressing [ENTER] at the message
"Press ENTER to confirm or ESC to cancel". Saving the data
on the screen will take you, in most cases to the previous
menu.
Type 99, then press [ENTER].Type 99 at the main menu
prompt and press [ENTER] to exit the SMT interface.
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
Prestige 662HW-61 Main Menu
Enter Menu Selection Number:
Prestige 662H/HW Series User's Guide
Advanced Management
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Security
24. System Maintenance
25. IP Routing Policy Setup
26. Schedule Setup
27. VPN/IPSec Setup
99. Exit
298