Dhcp Setup; Ip Pool Setup; Internet Access Wizard Setup: Third Screen; Figure 12 Internet Access Wizard Setup: Third Screen - ZyXEL Communications Prestige 662H Series User Manual

Prestige 662H/HW Series User's Guide

3.4.1 DHCP Setup

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige
as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP
configuration for the clients. If you turn DHCP service off, you must have another DHCP
server on your LAN, or else the computer must be manually configured.

3.4.1.1 IP Pool Setup

The Prestige is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to
192.168.1.64 for the client machines. This leaves 31 IP addresses, 192.168.1.2 to
192.168.1.32 (excluding the Prestige itself which has a default IP of 192.168.1.1) for other
server machines, for example, server for mail, FTP, telnet, web, etc., that you may have.

3.4.2 Internet Access Wizard Setup: Third Screen

Verify the settings in the screen shown next. To change the LAN information on the Prestige,
click Change LAN Configurations. Otherwise click Save Settings to save the configuration
and skip to the

Figure 12 Internet Access Wizard Setup: Third Screen

If you want to change your Prestige LAN settings, click Change LAN Configuration to
display the screen as shown next.
69
"Internet Access Wizard Setup: Connection Test" on page 70.
Chapter 3 Wizard Setup for Internet Access