Figure 266 Menu 25.1 IP Routing Policy Setup
Menu 25.1 - IP Routing Policy Setup
# A
- - --------------------------------------------------------------------------
1 Y SA=1.1.1.1-1.1.1.1,DA=2.2.2.2-2.2.2.5
SP=20-25,DP=20-25,P=6,T=NM,PR=0
2 N __________________________________________________________________________
__________________________________________________________________________
3 N __________________________________________________________________________
__________________________________________________________________________
4 N __________________________________________________________________________
__________________________________________________________________________
5 N __________________________________________________________________________
__________________________________________________________________________
6 N __________________________________________________________________________
__________________________________________________________________________
Enter Policy Rule Number (1-6) to Configure:
Table 146 Menu 25.1 IP Routing Policy Setup
ABBREVIATION
Criterion
SP
DA
DP
P
T
PR
Action
T
P
Service
MD
MT
MR
MC
Type a number from 1 to 6 to display Menu 25.1.1 – IP Routing Policy (see the next figure).
This menu allows you to configure a policy rule.
Chapter 43 IP Policy Routing
Criteria/Action
MEANING
SA
Source IP Address
Source Port
Destination IP Address
Destination Port
IP layer 4 protocol number (TCP=6, UDP=17...)
Type of service of incoming packet
Precedence of incoming packet
GW
Gateway IP address
Outgoing Type of service
Outgoing Precedence
NM
Normal
Minimum Delay
Maximum Throughput
Maximum Reliability
Minimum Cost
Prestige 662H/HW Series User's Guide
|GW=192.168.1.1,T=MT,PR=0
424