Figure 262 Menu 24 System Maintenance; Figure 263 Menu 24.10 System Maintenance: Time And Date Setting; Table 144 Menu 24.10 System Maintenance: Time And Date Setting - ZyXEL Communications Prestige 662H Series User Manual
Adsl 2+ 4-port security gateway
Hide thumbs
Also See for Prestige 662H Series:
- Quick start manual (5 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Prestige 662H/HW Series User's Guide
Figure 262 Menu 24 System Maintenance
Then enter 10 to go to Menu 24.10 System Maintenance Time and Date Setting to update
the time and date settings of your Prestige as shown in the following screen.
Figure 263 Menu 24.10 System Maintenance: Time and Date Setting
Use Time Server when Bootup= None
Time Server Address= N/A
Current Time:
New Time (hh:mm:ss):
Current Date:
New Date (yyyy-mm-dd):
Time Zone= GMT
Daylight Saving= No
Start Date (mm-dd):
End Date (mm-dd):
Table 144
FIELD
Use Time Server
when Bootup
Time Server Address
415
Menu 24 - System Maintenance
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Time and Date Setting
11. Remote Management
Enter Menu Selection Number:
Menu 24.10 - System Maintenance - Time and Date Setting
Press ENTER to Confirm or ESC to Cancel:
Menu 24.10 System Maintenance: Time and Date Setting
DESCRIPTION
Enter the time service protocol that your time server sends when you turn on
the Prestige. Not all time servers support all protocols, so you may have to
check with your ISP/network administrator or use trial and error to find a
protocol that works. The main differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
NTP (RFC-1305) is similar to Time (RFC-868).
None. The default, enter the time manually.
Enter the IP address or domain name of your time server. Check with your ISP/
network administrator if you are unsure of this information.
System Status
System Information and Console Port Speed
Log and Trace
Diagnostic
Backup Configuration
Restore Configuration
Upload Firmware
Command Interpreter Mode
Call Control
00 : 51 : 24
00 : 51 : 19
2000 - 01 - 01
2000 - 01 - 01
01 - 00
01 - 00
Chapter 41 System Maintenance
Advertisement
Table of Contents
Troubleshooting
