Chapter 26 Menu 1 General Setup; General Setup; Procedure To Configure Menu 1 - ZyXEL Communications Prestige 662H Series User Manual

26.1 General Setup

Menu 1 — General Setup contains administrative and system-related information (shown
next). The System Name field is for identification purposes. However, because some ISPs
check this name you should enter your computer's "Computer Name".
• In Windows 95/98 click Start, Settings, Control Panel, Network. Click the
Identification tab, note the entry for the Computer name field and enter it as the
Prestige System Name.
• In Windows 2000 click Start, Settings, Control Panel and then double-click System.
Click the Network Identification tab and then the Properties button. Note the entry for
the Computer name field and enter it as the Prestige System Name.
• In Windows XP, click start, My Computer, View system information and then click the
Computer Name tab. Note the entry in the Full computer name field and enter it as the
Prestige System Name.
The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave
this blank, the domain name obtained by DHCP from the ISP is used. While you must enter
the host name (System Name) on each individual computer, the domain name can be assigned
from the Prestige via DHCP.

26.2 Procedure To Configure Menu 1

Enter 1 in the Main Menu to open Menu 1 — General Setup (shown next).

Chapter 26 Menu 1 General Setup

Menu 1 General Setup
Menu 1 - General Setup contains administrative and system-related information.
Prestige 662H/HW Series User's Guide
C
H A P T E R
2 6
302