Type E at the "Enter Selection:" prompt to get the firmware file from the TFTP server. You may
Step 6.
type A to abort the firmware transfer at this point.
A)bort Download:
The following message displays when the firmware is transferred successfully to the VSG. The VSG
Step 7.
automatically restarts after the firmware upgrade is complete. Check the firmware version in the login
screen.
23.3 Configuration File Maintenance
You can only use the web configurator to perform configuration file backup and restore.
DO NOT INTERRUPT THE FILE TRANSFER PROCESS AS THIS MAY PERMANENTLY DAMAGE
23.3.1
Backup Configuration Using HTTP
Backup is highly recommended once your VSG is functioning properly.
Click System Tools and Configuration. A screen displays as shown next.
Step 1.
Configuration and Firmware Maintenance
TFTP Server IP Address :10.10.10.10
Filename
|---------+---------+---------+---------+---------|
**************************************************
Press 'A' to break download.
Figure 23-10 SMT: Firmware Upgrade Process
Saving the downloaded image file....
Saving data. Please wait...
Figure 23-11 SMT: Successful Firmware File Transfer
YOUR DEVICE.
:VSG1200.bin
WARNING!
VSG-1200 Vantage Service Gateway
23-5