Configuring Global Setting; Figure 102 Vpn: Global Setting; Table 75; Table 76 Vpn: Global Setting - ZyXEL Communications Prestige 662H Series User Manual

Prestige 662H/HW Series User's Guide

Table 75

LABEL
No
Name
Encapsulation
IPSec Algorithm
Disconnect
Back
Apply
Refresh

19.16 Configuring Global Setting

To change your Prestige's global settings, click VPN and then Global Setting. The screen
appears as shown.

Figure 102 VPN: Global Setting

The following table describes the fields in this screen.

Table 76 VPN: Global Setting

LABEL
Windows Networking
(NetBIOS over TCP/IP)
Allow NetBIOS Traffic
Through All IP/Sec
Tunnels
Back
241
DESCRIPTION
This is the security association index number.
This field displays the identification name for this VPN policy.
This field displays Tunnel or Transport mode.
This field displays the security protocols used for an SA.
Both AH and ESP increase Prestige processing requirements and communications
latency (delay).
Select Disconnect next to a security association and then click Apply to stop that
security association.
Click Back to return to the previous screen.
Click Apply to save your changes back to the Prestige.
Click Refresh to display the current active VPN connection(s).
DESCRIPTION
NetBIOS (Network Basic Input/Output System) are TCP or UDP packets that
enable a computer to find other computers. It may sometimes be necessary to
allow NetBIOS packets to pass through VPN tunnels in order to allow local
computers to find computers on the remote network and vice versa.
Select this check box to send NetBIOS packets through the VPN connection.
Click Back to return to the previous screen.
Chapter 19 VPN Screens