Figure 213 Menu 21.1.5.1 Generic Filter Rule; Table 128 Menu 21.1.5.1 Generic Filter Rule - ZyXEL Communications Prestige 662H Series User Manual

To configure a generic rule select an empty filter set in menu 21, for example 5. Select
Generic Filter Rule in the Filter Type field and press [ENTER] to open Menu 21.1.5.1 –
Generic Filter Rule, as shown in the following figure.

Figure 213 Menu 21.1.5.1 Generic Filter Rule

The next table describes the fields in the Generic Filter Rule menu.

Table 128 Menu 21.1.5.1 Generic Filter Rule

FIELD
Filter #
Filter Type
Active
Offset
Length
Mask
Value
More
Log
Action
Matched
Chapter 36 Filter Configuration
Menu 21.1.5.1 - Generic Filter Rule
Filter #: 5,1
Filter Type= Generic Filter Rule
Active= No
Offset= 0
Length= 0
Mask= N/A
Value= N/A
More= No
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
This is the filter set, filter rule coordinates, for instance, 2, 3 refers to the second filter
set and the third rule of that set.
Press [SPACE BAR] and then [ENTER] to select a type of rule. Parameters displayed
below each type will be different. Choices are Generic Filter Rule or TCP/IP Filter
Rule.
Select Yes to turn on or No to turn off the filter rule.
Type the starting byte of the data portion in the packet that you want to compare. The
range for this field is from 0 to 255.
Type the byte count of the data portion in the packet that you want to compare. The
range for this field is 0 to 8.
Type the mask (in Hexadecimal) to apply to the data portion before comparison.
Type the value (in Hexadecimal) to compare with the data portion.
If Yes, a matching packet is passed to the next filter rule before an action is taken or
else the packet is disposed of according to the action fields.
If More is Yes, then Action Matched and Action Not Matched will be N/A.
Select the logging option from the following:
None – No packets will be logged.
Action Matched – Only matching packets and rules will be logged.
Action Not Matched – Only packets that do not match the rule parameters will be
logged.
Both – All packets will be logged.
Select the action for a matching packet. Choices are Check Next Rule, Forward or
Drop.
Prestige 662H/HW Series User's Guide
Log= None
370