Table Of Contents - Kessel Staufix FKA Standard Installation And Operating Manual
Backwater valve for wastewater with or without raw sewage
Hide thumbs
Also See for Staufix FKA Standard:
- Installation and operating manual (144 pages) ,
- Installation and operating manual (72 pages) ,
- Installation and operating manual (16 pages)
Advertisement
Available languages
Available languages
1. Safety instructions
8. Commissioning Protocol for installation company ............................................................................................
Service and maintenance card enclosed
Dear Customer,
Before installing and commissioning
this KESSEL Staufix® SWA or Control-
fix®, please thoroughly read through
this manual and follow all instructions!
Please make sure that nothing was da-
maged during the shipment of this item. In
case damage did occur during the ship-
ment please go to Section 5 - Guarantee
Safety Instructions
During the installation, operation and
maintenance of this product, all applicable
safety measures including the correspon-
ding DIN and VDE norms and regulations
as well as any local or national electrical
safety precautions should be followed!
This system should not be installed or
operated in areas designated as explosion
risk areas. This system operated on elec-
trical currents and contains rotating me-
chanical parts. Not following all of the
above safety regulations could result in
Table of contents
............................................................................................
2.1
Application Staufix® FKA....................................................
2.2
Contents of delivery ............................................................
2.3
Pre-installation tips..............................................................
3.1
Concrete slab installation....................................................
3.2
Extended depth installation in conrete slab.........................
3.3
Exposed pipe installation ....................................................
3.4
Enstallation in moisture /Grondwater areas ........................
4.1
Inspection ...........................................................................
4.2
Maintenance .......................................................................
4.2.1
Assembly of lockable cover ................................................
4.3
Operational check according to DIN EN 13564 ..................
4.4
Optical probe check ............................................................
4.5
Emergency closure valve function ......................................
............................................................................................
............................................................................................
............................................................................................
1. Safety Instructions
damage to the unit, injury or possible
death to the operator.
Before and service, maintenance or
!
repair work is done to the unit the
power must be disconnected!
It should be checked and confirmed that
electrical cables as well as all electrical
systems are in perfect operating conditi-
on. If any of these parts are damaged the
system should not be placed in operation.
If the system is already in operation then it
should be disconnected from the power
source and no longer operated.
In order to insure proper condition and
operation of the system, it should be ins-
pected and maintained according to DIN
EN 13564.
We recommend that a service and main-
tenance contract is signed by a professio-
nal licensed service company.
18
During backwater or potential backwater
conditions no service or maintenance is to
be conducted on the system.
The backwater flaps as well as the emer-
gency backwater flap closure lever should
always have freely moveable and not be
blocked or obstructed in anyway.
Note:
VDE 0100, VDE 01107, IEC and local
EVU regulations (regulations of local
supplier) should be observed and fol-
lowed.
The control unit should not be installed
or operated in areas designated as ex-
plosion risk areas.
The operator of this system should fol-
low all instruction in this manual as
well as manual number 010-845!
Page
18
Page
19
Page
19
Page
19
Page
20
Page
21
Page
21
Page
21
Page
23
Page
23
Page
24
Page
24
Page
24
Page
25
Page
25
Page
26
Page
27
Page
29
- Quick Links:
- Inspection and Maintenance
Hide quick links:
Advertisement
