Beckhoff AX8000 Series Manual page 17

Damage to the environment or devices
• During installation it is essential to ensure that the specified ventilation clearances and climatic condi-
tions are adhered to. Further information can be found in the "Technical data [} 27]" and "Mechanical
installation [} 32]" sections.
• If the servo drive is operated in contaminated ambient air, the cooling openings must be checked regu-
larly for blockage.
• The servo drives contain components at risk from electrostatic discharge caused by improper handling:
ð Please ensure you are electrostatically discharged before touching the servo drive directly.
ð Avoid contact with highly insulating materials (synthetic fibers, plastic film etc.).
ð Place the servo drive on a conductive surface.
ð Do not touch the motor connector while the AX8000 is in operation.
Multi axis servo system AX8000
NOTE
Version: 1.6
For your safety
17