Option Modules; Installation; Option Modules Type Key - Beckhoff AX8000 Series Manual

Option modules

8 Option modules
8.1

Installation

The option modules are installed in the same way as described in section Mechanical Installation [} 32]. The
electrical installation mainly consists of connecting the AX Bridge via slider and interlock. If further steps are
required, the instructions can be found in a separate section under the description of the individual option
modules.
Danger to life due to high voltage on the DC link capacitors of the
servo drive AX8000!
The DC link capacitors RB+ and RB- and the test contacts DC+ and DC- on the
supply, axis and option modules can carry life-threatening voltages of ≥ 875 V
Take the following measures to avert danger:
• After disconnecting the servo drive from the mains supply, wait until the voltage has
fallen below 50 V
• Measure the voltage on the test contacts properly.
• Secure the work area properly and wear the PPE.
8.2

Option modules type key

48
DANGER
. Only then is it safe to work.
DC
Version: 1.6
.
DC
Multi axis servo system AX8000