Kessel Staufix Instructions For Installation, Operation And Maintenance page 46

Radio receiver as switched socket
• Insert the radio receiver in the socket
• Press the coupling key <1> for 2 seconds
LED <2> flashes red
• Press the teach key <2> on the control unit for 5 seconds.
Successful coupling is acknowledged as follows:
– Control unit: an acoustic signal is sounded and the
LED <1> flashes green
– Radio receiver: LED flashes green
Note: If the LED on the control unit flashes red, 3 such
switched sockets are coupled. A further switched socket can
only be coupled when one of the switched sockets saved
previously is deleted (see 6.6).
1) Nodon SmartPlug
2) For Permundo PSC 234: Press and hold for 5 seconds
Initial operation / configuration
1
, the
2
46 / 180
2
1
Ill. [13]
1
2
Ill. [14]
016-023