Kessel Staufix Instructions For Installation, Operation And Maintenance page 34

1.1 Product description, general
The backwater valves Staufix (referred to as backwater valve below) have been designed for
various applications:
↓ Variant
Backwater valve Staufix Control
Backwater valve Staufix
Backwater valve Staufix**
Clean out (inspection)
* DIN EN 13564
** can be retrofitted into a backwater valve type 2
x Standard (x) optional, retrofittable
The products are designed for installation in the concrete slab <1> or in exposed pipes <2> for
wastewater without sewage.
With the product variant "Staufix Control"
backwater occurs. At the same time, the alarm can be received wirelessly by a remote signal
receiver. With the radio receiver as a switched socket, any consumer (techn. data see product
data sheet) can be switched off. A maximum of 3 switched sockets can be integrated.
1) By replacing the cover (lockable cover with control unit)
2) Control unit is installed
General information about these instructions
1
Ill. [1]
Application / function
Type in accordance
with EN 13564
..type 2*
..type 2*
..type 1*
- -
an optical and acoustic alarm message is given if
2
34 / 180
Emergency closure
x
x
x
- -
Control unit
x
(x)
(x)
- -
016-023