Status - Buffalo TeraStation 3010 User Manual

Chapter 10 Appendix

Status

After you change any settings, the info LED will glow amber. You can also confirm the current status from the
Dashboard in Settings or by using NAS Navigator2. If NAS Navigator2 displays the status as unknown, check the
Dashboard in Settings for the status details.
You can click the "Clear" button to delete messages from the Dashboard.
Code
I01
I10
I11
I12
I13
I14
I15
I16
I17
I18
I19
I20
I21
I23
I25
I26
I27
I28
I31
I32
Description
Checking the system area.
A rise in the system temperature may have
exceeded the allowable safety value.
The drive has too many bad sectors.
Operating in degraded mode.
Formatting the RAID array.
Checking the RAID array.
Examining the error status of the RAID
array.
Note: Transfer speeds are slower during
the examination process.
Creating the RAID array.
Resynchronizing the RAID array.
Note: Transfer speeds are slower during
resynchronization.
Rebuilding the RAID array.
Note: Transfer speeds are slower during
the rebuilding process.
Rewriting the TeraStation.
Formatting the drive.
Checking the drive.
The initialization process has been started
by using the init button and settings are
being initialized.
Updating the TeraStation firmware.
The initialization process has been started
by using Settings and all settings are being
initialized.
Checking the USB drive.
Formatting the USB drive.
Appears when pressing the function
button to rebuild the RAID array after
replacing the drive.
Appears after replacing the drive when the
RAID array needs to be rebuilt in Settings
or formatting is necessary.
Corrective Action
-
Move the TeraStation to a cool location. Do
not place objects in the area around the
TeraStation.
Replace the drive by referring to the drive
replacement sections in chapter 8.
Check if the
it is, refer to the corrective action for the
E30
error.
-
-
-
-
-
-
-
-
-
-
Do not turn off the TeraStation's power.
-
-
-
Press the function button to rebuild the
RAID array.
From Settings, either rebuild the RAID
array or format the drive.
224
E30
error is also displayed. If