Buffalo TeraStation 3010 User Manual page 55

Chapter 4 Storage Management
7
From Settings, click Storage.
8
Click the settings icon (
9
Select the inserted new drive and click Format Drive.
10
Select a format type and click Format.
11
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
12
Click OK when completed.
Drives Are Currently in JBOD
If the drives are currently in JBOD (not in a RAID array), you may change it to a RAID 1 array. To create the RAID 1
array using RMM, you must have at least two drives available in JBOD.
) to the right of "Drives".
54