Buffalo TeraStation 3010 User Manual page 78

Chapter 4 Storage Management
7
The iSCSI volumes on the TeraStation will be listed under "Discovered targets" on the Targets tab. Select the
desired volume to connect and click Connect.
8
Click OK.
9
When the status of the selected volume is displayed as "Connected", the connection is established properly.
Configuring Access Restrictions for Individual Volumes
If access restrictions are configured for a volume, that volume cannot be accessed unless the target CHAP name and
secret are authenticated.
1
From Settings, click Storage.
2
Click the settings icon (
3
Click the volume to enable access restrictions.
4
Enable authentication, enter the target CHAP name and secret, and click OK.
Note: To enable mutual authentication, select the "Enable" checkbox to the right of "Mutual Authentication"
and enter the initiator CHAP secret.
5
Click OK when completed.
) to the right of "iSCSI".
77