Buffalo TeraStation 3010 User Manual page 70

Chapter 4 Storage Management
• Do not use any of the following words for the name of a volume as these words are reserved for internal use by
the TeraStation: array x, authtest, disk x, global, homes, info, lost+found, lp, mediacartridge x, msdfs_root, mt-
daapd, printers, ram, spool, usbdisk x. Any instances of "x" denote a number (for example: array1 or disk3)
1
From Settings, click Storage.
2
Click the settings icon (
3
Select the drive or array where the volume will be located and click Enable LVM.
4
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
5
Click OK.
) to the right of "LVM".
69