Leds; Proxy Server - Buffalo TeraStation 3010 User Manual

Chapter 7 Advanced Features

LEDs

You may adjust the brightness of the LEDs on the TeraStation.
1
From Settings, click Management.
2
Click the settings icon (
3
Click Edit.
4
Click the Front Panel tab.
5
Configure your settings, then click OK.

Proxy Server

If you place the TeraStation on a network that passes through a proxy server, configuring the proxy server settings is
recommended. Unless you configure the proxy settings, firmware updates in Settings will not work. To configure the
settings, follow the procedure below.
1
From Settings, click Network.
) to the right of "Notifications".
198