Opening Settings - Buffalo TeraStation 3010 User Manual

Chapter 2 Configuration
1
From Settings, click Management.
2
Click the settings icon (
3
Click Execute Wizard.
4
The "Confirm Operation" screen will open. Enter the confirmation number, then click OK.
5
Follow the procedure on the screen and finish the setup wizard.

Opening Settings

1
Double-click the NAS Navigator2 icon (
2
Right-click your TeraStation's icon and select Open Settings. For macOS, select the TeraStation's icon while
holding down the control key, then select Open Settings.
) to the right of "Restore/Erase".
) to start NAS Navigator2.
21